UK: Kingspan has confirmed that a limited amount of its Kooltherm K15 phenolic insulation product was used in Grenfell Tower. In response to a report by Channel 4 News the insulation producer said that a ‘very small quantity’ of the product had been used without its knowledge in a façade refurbishment of the high-rise tower. The building subsequently suffered a fire in June 2017 in which at least 80 people are believed to have died or gone missing.
“Kingspan had no involvement in either the design or the specification of the refurbishment of the Grenfell Tower facade, and neither Kingspan insulated panels nor Kingspan façade systems were used on Grenfell Tower,” said Kingspan in a statement. It added that following the fire it became aware that a limited quantity of Kingspan Kooltherm K15, less than 5% of the estimated total amount of insulation used on the building façade, was sourced by a third party distributer and supplied to contractors involved in the refurbishment. It impressed that, “It appears that Kooltherm K15 has been used without our knowledge, as part of a combination for which it was not designed, and which Kingspan would never recommend.”
The majority of the insulation purchased for use in the building refurbishment was Celotex’s RS5000 polyisocyanurate foam (PIR) insulation board. This product has been stopped for use in rainscreen cladding systems for buildings over 18m tall whilst the investigation into the Grenfell fire continues.
